I have already shared with you about the components of the PE breathable film production line是, but the specific situation of these components may not be understood yet, so...

Mold: The PE breathable film production line mainly uses a fully automatic casting T-shaped mold head, with a nozzle width of approximately 2500mm. The material of the mold head is generally imported high-quality hot work mold steel, making its surface appear very fine and polished.

Extruder unit: Its extruder unit mainly uses Φ The 150/34D screw is then treated by nitriding, with a nitriding layer thickness of approximately 0.5-0.7mm and a surface hardness of approximately HV920 or higher.

Swing unit: Its imported configuration adopts a miniature reducer motor, which is stable in transmission and can control the swing range between 0 and 300mm. It can also be controlled by itself, which can avoid wrinkles and ribs formed on the membrane roll.

Stretching unit: It mainly adopts a hot oil heating system, which includes two preheating rollers, six stretching rollers, and a pressure roller.

Thickness measurement unit: The PE breathable film production line mainly uses an X-ray non-contact computer integrated testing system.